MQi GT EVO - Ersatzteile
- Uwe72
- Beiträge: 163
- Registriert: So 25. Dez 2022, 12:55
- Roller: HL 6.0 Max ,GT EVO & Revoluzzi 20Plus
- PLZ: 45145
- Wohnort: Essen
- Kontaktdaten:
Re: MQi GT EVO - Ersatzteile
Hier mal der Stromlaufplan 
NQIX 500 My 26
GT EVO , HL 6.0 Max, + Revoluzzi 20Plus
Niu KQI Pro
GT EVO , HL 6.0 Max, + Revoluzzi 20Plus
Niu KQI Pro
-
paul1984
- Beiträge: 3
- Registriert: So 26. Apr 2026, 02:06
- PLZ: PC
- Land: anderes Land
- Kontaktdaten:
Re: MQi GT EVO - Ersatzteile
Hello, any update on the resolution of this 195 error? thanks
-
zock3r1608
- Beiträge: 300
- Registriert: Mi 15. Jun 2022, 02:05
- Roller: MQi GT EVO
- PLZ: 67
- Kontaktdaten:
Re: MQi GT EVO - Ersatzteile
Error 195 means that the DCDC converter is not sending any CAN messages.
Make sure you hear the seat-closed sound. If the magnetic switch is not engaged, the DCDC converter remains disabled. If you hear both the open and close sounds from your seat, your DCDC converter may be faulty. A red battery icon may light up above the LCD screen, if the 12V battery voltage is low and the DCDC converter is not working.
Also check that the main power wires are not short-circuited. The EVO has an issue with undersized wires in the large connector directly underneath the seat bank. This connector connects the charging connector under the seat to the main cable harness.
If there is a short circuit, the BMS will not be enabled, which means the DCDC converter will not receive the high voltage it needs to operate. This results in the same symptoms.
viewtopic.php?p=367879#p367879
Make sure you hear the seat-closed sound. If the magnetic switch is not engaged, the DCDC converter remains disabled. If you hear both the open and close sounds from your seat, your DCDC converter may be faulty. A red battery icon may light up above the LCD screen, if the 12V battery voltage is low and the DCDC converter is not working.
Also check that the main power wires are not short-circuited. The EVO has an issue with undersized wires in the large connector directly underneath the seat bank. This connector connects the charging connector under the seat to the main cable harness.
If there is a short circuit, the BMS will not be enabled, which means the DCDC converter will not receive the high voltage it needs to operate. This results in the same symptoms.
viewtopic.php?p=367879#p367879
Wer ist online?
Mitglieder in diesem Forum: 3q6, AustroTom, Malte86, NiuSL, Semrush [Bot], Teckel1973, tensecondtom und 27 Gäste